General; Features - Sony TRINITRON PVM-8041Q Service Manual

PVM-8041Q/8044Q
SECTION 1
GENERAL
1-1. FEATURES
FouTpotor system n available
The monitor can display PAL, SECAM, NTSC3.58 and
NTSC4.43* signals. The appropriate color system is selected
automatically.
* A signal of NTSC443 is used for playing back NTSC recorded
video cassettes with a video tape recorder/player especially
designed for use with this system.
Super Fine Pitch Trinitron
(PVM-8044Q only)
The Super Fine Pitch Trinitron picture tube provides a high
resolution picture. Horizontal resolution is more than 450
TV lines at the center of the picture.
The picture can be displayed in blue and black only, this
facilitates hue adjustment and the observation of video
noise.
Analog RGB or component (Y, R-Y and B-Y) signals from
video equipment can be input through these connectors.
Autooii^ bnhlMMM V >
The Y/C, VIDEO IN and EXT SYNC IN connectors are
terminated at 75 ohms inside, when no cable is connected
to the loop-through output connectors. When a cable is
connected to an output connector, the 75-ohm termination is
automatically released.
EIA standard 19-inch rack mounting
By using an MB-S07 mounting bracket (not supplied), the
monitor can be mounted in an EIA standard 19-inch rack.
For details on mounting, see the instruction manual of the
MB-507.
The video signal, split into the chrominance signal (C) and
the luminance signal (Y), can be input through this connec¬
tor, eliminating the interference between the two signals,
which tends to occur in a composite video signal, assuring
video quality.
Brain currant feedback droit
The built-in beam current feedback circuit assures stable
white balance.
CombWlsr
When NTSC video signals are received, a comb filter
activates to increase the resolution, resulting in fine picture
detail without color spill or color noise.
For the Customers in the USA
INFORMATION
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residen¬
tial area is likely to cause harmful interference in which case
the user will be required to correct the interference at his
own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
For the Customers In Canada
This apparatus complies with the Class A limits for radio
noise emissions set out in Radio Interference Regulations.