Operational Practices; Blasting Areas - Iridium EDGE User Manual

WARNING Properly ground the Iridium Edge. Failure to properly ground the Iridium Edge
could cause unexpected currents, which could cause serious injury or death.

Ensure that the Iridium Edge is connected to the power source through a quick tripping fuse. The
fuse should be located close to the power source.

Secure all cables including the Iridium Edge's pigtail cable.
WARNING Always secure power cables. Failure to secure cables could result in fraying or
failure of the power cable, resulting in fire and or failure of the device. These hazards could
cause serious injury or death.

Screw the mating cable onto the Iridium Edge so that it is finger tight. Do not use a wrench to
tighten the mating cable to the Iridium Edge.

5.8 Operational Practices

The following guidelines must be followed when using the Iridium Edge.
5.8.1

Blasting Areas

The Iridium Edge contains a transmitter and it must be considered as a two-way radio in blasting areas.
56