2.8.1
Connector Part Numbers
The Iridium Edge uses an eight (8) pin male M12 connector. Connector and recommended mating
connector part numbers are provided in the table below.
Recommended Mating Connector
2.8.2
Connector Pin-outs
Connector pin positions and the corresponding pin-out descriptions are given in the figure and table
below.
Figure 2-6 Connector
Table 2-3 Connector Specifications
Parameter
Connector Type
Mating Connector Type
Value
M12 – 8 Pin Male
M12 -8 Pin Female with IP67 rating
Digikey part# A122384-ND
29