Cancel Of The Test Mode; Contents Of The Test Mode; Deck Test Mode; Cd Test Mode - Kenwood RXD-V333 Service Manual

3-2 Cancel of the test mode

By turning the power off, the system is initialized and the test mode is canceled.

3-3 Contents of the Test Mode

3-3-1 Deck Test Mode

KEY DISPLAY
REC/ARM Normal display
*Mechanism SW Detection
HALF SW DISPLAY
A PACK SW "T" (The first dot)
B PACK SW "P"(The third dot)
B FWD SW "T"(The sixth dot)
A PLAY SW "Moon"(Segment)

3-3-2 CD Test Mode

KEY
CD-PLAY/PAUSE
(Change the mode 05 and 03
alternately by the stop key.)
DISC 1
(Cyclically changed in the
stop mode only.)
STOP
TAPE EQ.
REVERSE MODE
CIRCUIT DESCRIPTION
If the REC/ARM key is pressed, the system record for 4 seconds. Then, it rewinds to the REC
starting position and plays back automatically. If the REC/ARM key is pressed, during the 4
seconds REC operation,the system records further for 4 seconds, then returns to the starting
position of the first 4 seconds REC operation and plays back.
HALF SW
A CrO2 SW
B RVS REC SW
B CrO2 SW
B PLAY SW
DISPLAY
05 :
: Tracking-servo on.
03 : Tracking-servo off.
01 : STOP
Adjustment value/mean value
07 TB value
08 TG value
09 FE value
10 TE value
01 : Stop (Press it 1time.)
Cancel the test mode. (Press it 2 times.)
Ex.01~02 CD track no. up.
Ex.02~01 CD track no. down.
RXD-V333/V535//V636/V737
OPERATION
DISPLAY
"A"(The second dot)
"E"(The fourth dot)
"E"(The seventh dot)
"Sun"(Segment)
OPERATION
FB value
FG value
RF value
VC value
5