Accessories; System Configuration; Cautions; Table Of Contents - Kenwood RXD-V333 Service Manual

RXD-V333/V535//V636/V737
Contents
CONTENTS / ACCESSORIES .................................. 2
EXTERNAL VIEW .......................................................3
DISASSEMBLY FOR REPAIR....................................3
CIRCUIT DESCRIPTION ............................................4
ADJUSTMENT ............................................................9
WIRING DIAGRAM ...................................................11

Accessories

FM indoor antenna (1)
(T90-0836-05)
Use to adapt the plug on the power cord to the shape
of the wall outlet.
(Accessory only for regions where use is necessary.)

System configuration

SYSTEM
XD-V333
XD-V333S
XD-V535
XD-V535-GR RXD-V535-GR
XD-V535S
XD-V535S-H
XD-V636
XD-V737
XD-V737S

Cautions

Operation to reset
The microcomputer may fall into malfunction (impossibility
to operate, erroneous display, etc.) when the power cord is
unplugged while power is ON or due to an external factor.
In this case, execute the following procedure to reset the
microcomputer and return it to normal condition.
2
CONTENTS / ACCESSORIES
AM loop antenna (1)
(T90-0852-05)
AC plug adaptor (1)
(E03-0115-05)
M type only
MAIN UNIT DESTINATION
RXD-V333 MI
RXD-V333S M2
RXD-V535 MIV
M1
RXD-V535S M2
RXD-V535S-H M2
RXD-V636 MI
RXD-V737 MIV
RXD-V737S M2
PC BOARD .............................................................. 12
SCHEMATIC DIAGRAM ...........................................21
EXPLODED VIEW ....................................................41
PARTS LIST..............................................................43
PARTS DESCRIPTIONS ..........................................54
SPECIFICATIONS ....................................................55
Remote control unit (1)
(A70-1415-05): RC-V535
Battery cover (A09-1192-08)
Speaker cords
See the following table
XD-V636 (2)
XD-V737, XD-V737S (4)
Provided in the speaker package
SPEAKER SP CORD PARTS No
LS-N373 E30-5829-08
LS-N373 E30-5829-08
LS-N573 E30-5829-08
LS-N573-GR E30-5829-08
LS-N573 E30-5829-08
LS-N573-H E30-5829-08
LS-N653 E30-5475-08
LS-N773 E30-5876-08
LS-N773 E30-5876-08
Unplug the power cord from the power outlet then,
while holding the ENTER key depressed, plug the
power cord again.
ENTER
(Main unit only)
÷ Please note that resetting the microcomputer clears the
contents stored in memory and returns it to the condition
when it left the factory.
Batteries (R6/AA) (2)
Video Cord (1)
(E30-1427-05)