Table of Contents
Advertisement
RXD-V333/V535//V636/V737
1. Initialization
1-1 Setting of the Initial Conditions
While pressing the [ENTER] key, plug the AC CORD into
AC wall outlet.
1-2 Initializing Operation
• A microcomputer is initialized for start when the AC power
is turned on when pressing the [ENTER] key. At that time,
CD and cassette mechanisms are also initialised.
• During the initial conditions, the display shows (INITIAL-
IZE( and after that it will be returned to standby condition.
1-3 Initial Items
(1) AMPLIFIER
• POWER ON/STANDBY
• VOLUME
• BALANCE
• INPUT SELECTOR
• SOURCE DIRECT
• MUTE
• AUTO POWER SAVE
• AUX(DVD/VIDEO)
INPUT LEVEL
• DISPLAY MODE
• BEEP SOUND
(2) TUNER
• BAND
• FREQUENCY
• AUTO/MONO
• PRESET CHANNEL
2. Destination List of Tuner
Set
Type
M,Y
K2
M2
K3
M,Y,X
E1
3. Test Mode
3-1 Setting of the Test Mode
TAPE MODE
CD MODE
SUB CLOCK OSC
DIAGNOSIS
4
CIRCUIT DESCRIPTION
STANDBY
14
CENTER
TUNER
OFF
OFF
OFF
-3
AUTO
ON
FM
LOWEST FREQUENCY
AUTO
"--" ch
Tuning Frequency
BAND
Range
FM
87.5MHz~108.0MHz
AM
530kHz~1610kHz
FM
87.5MHz~108.0MHz
MW
530kHz~1610kHz
SW
5.9MHz~17.9MHz
FM
87.5MHz~108.0MHz
AM
531kHz~1602kHz
TAPE A (< >) key+AC-ON
DISC3 key+AC-ON
MENU key + AC -ON
The oscillation diagnosis(existence of oscillation and measurement of period) of a sub clock is per-
formed before the test mode is entered. If the diagnosis result is OK, the system enters the test mode.
If the diagnosis result is NG, the oscillation of the sub clock is diagnosed again. If the result is OK, the
system enters the test mode. If the diagnosis result is continuously NG 5 times, the system stops with
"ERR1" and "ERR2" displayed
(3) CASSETTE DECK
• REVERSE MODE
• TAPE A/B
• TAPE DIRECTION
(4) AUX (DVD/VIDEO)
• DVD/VIDEO DISPLAY
(5) OTHER
• CLOCK
• Program Timer Recoding
• Program Timer Play
• Program on Mode
• SLEEP TIMER
(6) Equalizer
• Equalizer
• CUSTOM EQ.1~3
• EX. BASS
• 3D LEVEL
1-4 Mechanism Initialization
1-4-1 CD Mechanism
• If a mechanism error occurs "C ERR" is indicated on the
display.
1-4-2 DECK mechanism
• When the initial condition becomes NG for the third
time,decide the error.
The error condition is displayed as X ERR on the display.
1-4-3 Error display
• If both mechanism (CD/DECK) error occur, the display is
indicated as follows.
C X ERR
Channel
IF
Space
100kHz
+10.7MHz
10kHz
+450kHz
100kHz
+10.7MHz
10kHz
+450kHz
5kHz
+450kHz
50kHz
+10.7MHz
9kHz
+450kHz
REVERSE
B
FORWARD
DVD
12:00am
ON TIME 12:00am
OFF TIME 12:00am
ON TIME 12:00am
OFF TIME 12:00am
OFF
OFF
OFF
FLAT
ON
OFF
TUNER
RF
Emphasis
25kHz
1
10kHz
0
25kHz
1
10kHz
0
5KHz
0
25kHz
0
9kHz
0
Hide quick links:
Advertisement
Table of Contents
