Basic Operations - Uniden R3 User Manual

Long range radar/laser detector
Hide thumbs Also See for R3:
Table of Contents

Advertisement

MENU ITEM
WHAT IT DOES
GMT
Sets time zone according to Greenwich Mean Time
(GMT).
(GPS on)
DST
Daylight Saving Time
(GPS on)
BAT Warning
Sounds a warning tone if the vehicle battery
power drops below 11V.
BAT Saver
Turns off power to the R3 if the speed stays at 0 or
if the GPS is not connected for more than an hour.
(GPS on)
Self Test
Runs a self diagnostic test on the unit to check for
faults.
Factory Reset?
Resets all settings to the factory defaults.
Delete All Mute?
Delete all saved Mute Memory
(GPS on)
Delete All User
Delete all user-selected memory points.
(GPS on)
Version
Displays the latest firmware version.
DB Ver
Displays the latest database version.
(GPS on)
Exit
Closes the Menu system.

BASIC OPERATIONS

HOW DO I ...?
Turn on the R3
Adjust the volume
Mute alarm audio during the
alert
Change the screen's brightness
There is no confirmation request for reset.
There is no confirmation request to delete all
Mute Memory points.
TRY THIS...
Be sure the unit is connected to power and then press POWER. The unit
turns on and runs through an initial self-check if Self Test is turned on. It
displays the different bands and their settings.
The R3 turns on automatically when you start the vehicle.
• Press VOL + to increase volume. The unit beeps and displays a number
increase.
• Press VOL – to decrease volume. The unit beeps and displays a number
decrease.
Press MUTE/DIM during an audio alarm to mute it. (This is especially useful
in situations where the alert may be prolonged, such as at red lights.) You
can also press the MUTE button on the charger (see page 8).
Press and hold MUTE/DIM. The R3 announces the brightness level (Bright,
Dim, Dimmer, Dark, or Off) as it changes to that level. Press and hold the key
again to cycle between the brightness levels.
SETTINGS
Most common time zone settings
for North America are:
x GMT-05:00 - Eastern Standard
x GMT-06:00 - Central Standard
x GMT-07:00 - Mountain Standard
x GMT-08:00 - Pacific Standard
x GMT-09:00 - Yukon Standard
x GMT-10:00 - Alaska-Hawaii
On
Off (Default)
On
Off (Default)
On
Off (Default)
On (Default)
Off
Press MENU to reset to factory
settings.
points.
Press MENU to delete Mute
Memory points.
Press MENU to delete.
NA
NA
NA
- 12 -
Standard

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents