Table of Contents
Advertisement
Although it is not required, it helps to anchor the balancer to
the floor using concrete anchors through the holes
provided. If you do not wish to bolt the balancer to the floor
it will be necessary to weight the balancer down with ballast.
Standard Accessories
Graduated Cone Assortment (hardened, 3-piece)
Wheel Weight Pliers
Rim Width Caliper
Threaded Main Shaft
Quick-Release Hub-Nut With No-Mar Ring
Quick-Release Hub-Nut Spacer Cup
Rear Mount Cone Spring
Power Cord
Main Shaft Bolt
100-gram Calibration Weight
Optional Accessories
Large Truck Cone and Cup Adapter Kit Assembly
Technical Data / Features / Specifications
Voltage . . . . . . . . . . . . . . . . . . . . 110/220V 50/60HZ
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 decibels
Working Temperature . . . . . . . -5C / 27F to 50C / 82F
Power Consumption . . . . . . . . . . . . .. . . . . . 180 Watts
Drive System . . . . . . . . . . . . . . .. . . . . . . . . Belt Drive
Cycle time . . . . . . . . . . . . . . . . . . .6-9 seconds (avg.)
Balancing Modes . . . . . . . Dynamic / Static / Four Alloy
Top Positioning Weight Locator . . . . . . . . . . . . . Standard
Inside & Outside Measuring . . . . . . . . . . . . . . Standard
Millimeter / Inches Selection . . . . . . . . . . . . . . Standard
Self Calibration Function . . . . . . . . . . . . . . . . . . Standard
Wheel Distance Setting. . . . . . . . . . . . . . . . . Manual
Ounce / Gram Selection. . . . . . . . . . . . . . . . . . Standard
Auto Start When Hood is Lowered. . . . . . . . . Standard
Brake Type Automatic. . . . . . . . . . . . . . . . . . Electronic
Manual Brake Capability. . . . . . . . . . . . . . . . . . Standard
Max. Tire Diameter. . . . . . . . . . . . . . . 40" / 1016 mm
Max. Tire Weight . . . . . . . . . . . . . .145 pounds (65 Kg)
Max. Rim Diameter. .. . . . 10" - 24" / 254 mm - 610 mm
Wheel Width Capacity. . . . . . 2" - 20" / 51 mm - 508 mm
Balancing Increments . . . . . . . . . .0.25 or 0.01 ounce
Average Balancing Speed. . . . . . . . . . . . . . . 280 RPM
Accuracy. . . . . . . . . . . . . . . . . . . . . . . . Within .01 Oz.
Resolution (Round Off Mode) . . . . . . . . 0.01 ounce, 1.4°
Shipping Weight . . . . . . . . . . . . . 540 pounds (245 Kg)
MOUNTING THE HOOD ASSEMBLY
1. Locate the hood assembly and open the accessory box
and remove the hood assembly hardware and hood spring.
2. Use help and carefully assemble the hood as described
below.
3. Attach the hood mounting bracket to the rear of the
balancer cabinet using the 3/8" allen bolts and washers.
6
Hide quick links:
Advertisement
Table of Contents
