Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Protective goggles, safety glasses, or a face shield
must be worn by the operator. Care should be taken to
see that all eye and face safety precautions are followed
by the operator. ALWAYS WEAR SAFETY GLASSES.
Keep guards and safety features in place and in
working order.
Wear proper protective clothing. Safety toe, non-slip
footwear and protective hair covering to contain hair is
recommended. Do not wear loose clothing, or jewelry
when operating the balancer.
If an extension cord is necessary, a cord with a
current rating equal to or more than that of the equipment
should be used. Cords rated for less current than the
equipment may overheat. Care should be taken to arrange
the cord so that it will not be tripped over or pulled.
Do not disable hood cover operation, or in any way
shortcut safety controls and operations.
Be sure that all wheels are mounted properly, the hub
nut engages the arbor for not less than four turns, and the
hub nut is firmly tightened before spinning the wheel.
Read and understand this manual before operating.
Be sure the balancer is properly connected to the
power supply and electrically grounded.
Do not operate damaged equipment or if the power
cord is cut or worn.
Keep work area clean and well lighted. Cluttered
and/or dark areas invite accidents.
KEEP ALL INSTRUCTIONS PERMANENTLY WITH UNIT
AND ALL SAFETY DECALS CLEAN AND VISIBLE.
READ BEFORE OPERATING UNIT
Avoid dangerous environments. Do not use power
tools or electrical equipment in damp or wet locations, or
expose them to rain and moisture.
Avoid unintentional starting. Be sure the balancer is
turned off before servicing.
Disconnect the balancer before servicing.
Use only manufacturer's recommended accessories.
Improper accessories may result in personal injury or
property damage.
Repair or replace any part that is damaged or worn
and that may cause unsafe balancer operation. Do not
operate damaged equipment until it has been examined
by a qualified service technician.
Never overload or stand on the balancer.
Do not allow untrained persons to operate machinery.
To reduce the risk of fire, do not operate equipment in
the vicinity of open containers or flammable liquids.
Adequate ventilation should be provided when work-
ing on operating internal combustion engines.
Keep hair, loose clothing, fingers, and all parts of
body away from moving parts.
Use equipment only as described in this manual.
Use only manufacturer's recommended attachments.
4
Hide quick links:
Advertisement
Table of Contents
