Ipv5010, Ipv5050, Ipv6013, Ipv6015 And Ipv6016 Back Panel - Cisco IPV5000 Installation Manual

IPV5010, IPV5050, IPV6013, IPV6015, and IPV6016
Back Panel
F-Con
1
1 F-Con
2 Pr Pb Y
3 CVBS
4 Audio Out (L/R)
5 HDMI
6 NETWORK
7 OPTICAL
7 IR
8 Power
Note: This illustration may vary from the actual product.
Pr Pb Y CVBS
2 3
Connect to in-house coaxial wiring, if applicable (Optional)
Connect the receiver to the component video input (PrPbY) on the
HDTV. See pages 14 and 15
Connect to composite video input on your HDTV or SDTV
Connect RCA-type cables to Audio Out to send analog audio signals
(left and right) to a TV with stereo inputs or to a stereo amplifi er
Connect an HDTV HDMI (High-Defi nition Multimedia Interface) cable
from the HDTV to the HDMI port. HDMI supports both digital audio and
video. See page 14
Connect to the Ethernet (CAT-5) network at your home, if applicable
Connect an optical cable to send a digital audio signal to a surround-
sound receiver or other digital audio device
Available to be connected to an approved remote IR receiver (purchased
separately). Contact your service provider for details
Connect the DC output of the AC power adapter (provided) to deliver
power to the set-top. Use only the AC power adapter provided with
the set-top
L R HDMI NETWORK
4 5
for more information
for more information
OPTICAL POWER
IR
6 7 8 9
11