Table of Contents
Advertisement
If the location does have an entry, then that
number will be added to any pre-dialed digits and
the phone will go off-hook and begin dialing.
Audio Volume
Audio volume is adjusted during an active call by the
following key sequence:
Pressing the volume
or
the unit. Separate volume settings are maintained
for normal, handsfree and Headset modes. When
the volume keys are pressed during a call the
screen will show:
As the volume is increased,the number of blocks
shown will increase. As the volume is decreased
fewer blocks will be shown.
Ringer Volume
• From the idle (OFF) mode, press SEL then
or
key to RINGER VOLUME.
• Press SEL again. The current ringer volume
will be shown:
• Press
and
keys or enter digit 0-6 to the
desired ringer volume. The current ring tone
is played and the volume bar is increased/de-
creased each time the setting is adjusted. At
the lowest setting, the Handset will not ring
when a call comes in and the display will show:
• Press SEL to confirm the setting.
Ringer Tone
• From the idle (OFF) mode, press SEL then
key to RINGER VOLUME.
• Press SEL then you are prompted to choose
INTERCOM CALL or OUTSIDE CALL.
Press
and
keys to select the desired
option.
• Press SEL again. You can then use
keys or enter digit 0-9 to sampling the ring tone.
The screen, for example, will show:
keys on the side of
and
25
Handset Settings
Advertisement
Table of Contents
