Input Signal Hot Backup; Summarize; How To Use Hot Backup - Magnimage LED-570EV User Manual

Input signal hot backup

Summarize

Note that what the input signal hot backup is? What is the use of it?

In simple terms, warm backup is that when the input signal missed, using

spare
input signal automatically and rapidly to replace the original input signal,

maximum
ensure output image uninterrupted.

Hot backup is a powerful guarantee to the stability of the system, which

makes the impact to be the lowest that made by signal input device
failure.

How to use hot backup?

Enter the "image switching sub menu" and select "auto switch" function, you
can set how to use LED-570E series video processors hot backup function
here. Here are four options, for details please refer to the table below:
Item
Off
Window 1
Window 2
Signal
Details
Not to use the heat backup function.
If image 1 signal is valid, then output image 1, otherwise, output
image 2.
If image 2 signal is valid, then output image 2, otherwise, output
image 1.
In the case of two channels signal are invalid, the first valid of the
two channels signal, then its image will be output, the behind
signal does not affect the output.
34