Table of Contents
Advertisement
WHAT TO DO IN EMERGENCIES
— Electronic Stability Control (ESC) Activation / Malfunction Indicator Light
The "ESC Activation/Malfunction Indicator Light" in the instrument cluster will come on
for four seconds when the ignition switch is turned to the ON/RUN position. If the "ESC
Activation/Malfunction Indicator Light" comes on continuously with the engine running, a
malfunction has been detected in the ESC system. If this light remains on, see your au-
thorized dealer as soon as possible to have the problem diagnosed and corrected.
NOTE:
•
The "ESC Off Indicator Light" and the "ESC Activation/Malfunction Indicator Light"
come on momentarily each time the ignition switch is turned to ON/RUN.
•
Each time the ignition is turned to ON/RUN, the ESC system will be ON even if it
was turned off previously.
•
ESC Activation/Malfunction Light can blink during a ESC or TC intervention.
Instrument Cluster Indicator Lights
– Turn Signal Indicator
The arrows will flash with the exterior turn signals when the turn signal lever is oper-
ated.
NOTE:
If either indicator flashes at a rapid rate, check for a defective outside light bulb.
— High Beam Indicator
Indicates that headlights are on high beam.
— Vehicle Security Light
This light will flash rapidly for approximately 15 seconds when the vehicle security alarm
is arming. The light will flash at a slower speed continuously after the alarm is set. The
security light will also come on for about three seconds when the ignition is first turned
on.
— Cruise Control SET Indicator
This indicator will illuminate when the cruising speed has been set.
— Front Fog Light Indicator
This indicator will illuminate when the front fog lights are on.
— Park/Headlight ON Indicator
This indicator will illuminate when the park lights or headlights are turned on.
— Electronic Stability Control (ESC) OFF Indicator Light
This light indicates the ESC system has been turned off by the driver.
109
Hide quick links:
Advertisement
Table of Contents
