Pioneer PDP-433PU Service Manual page 87

5
Y DRIVE, SCAN (A), (B) Assy
1
Remove the three screws.
Front Case Assy 43 (P)
2
Loosen a rivet.
3
Remove the Lead Cover (P).
4
Pull out a Flexible Cable.
2
Lead Cover (P)
Rivet
Turn the rivet, taking care not to push
on it, because pushing on it may set
the rivet to its original position.
Remove the lead cover (P) together
with the rivet when the rivet is fully
loosened.
5
Detach the lower part of the Front Case 43 (P) so that it can
swing open hinged at the top.
6
Remove the Front Case 43 (P).
6
The hook of the Front Case 43 (P) is
fixed with the Rear Case and the
aluminum material, as shown in the
illustration.
5
5
6
1
×3
4 4
3
Lead Cover (P)
Front Case Assy 43 (P)
Rear Case
Aluminum
Materials
6
7
Remove the Rear Case 43P. (Screws × 19)
7
8
Remove the Y DRIVE Assy.
(Connector, PCB Spacer × 3, Screws × 8)
9 Remove the Front Chassis V. (Screws × 5)
8
×2
9
9
8 8
PDP-433PU
7
8
Y DRIVE Assy
8
×2
8
9
9
Front Chassis V
9
8 8
8
A
B
C
D
E
F
87