Table of Contents
Advertisement
LAN setting function:
The utility featured with "LAN" setting function to help user to modify the IP parameters of the
installed network devices. User can step by step to setup IP address, username and password.
Note 1: If no IP address is assigned within 30 seconds, the networked device will automatically
assign 192.168.0.100. User may now open your web browser, and key in
the address bar of you web browser to logon Network Camera's web configuration page.
Note 2: Power Line Frequency
-
If you found the video image is flash, you may need to choose 50 or 60 Hz frequency
(depends on country).
-
World wide power line frequency table is inside user's manual, Appendix
Note 3: If you have problem when connecting the network camera to a router, please read user's
manual inside CD, the section "Installation to a router".
7
http://192.168.0.100
in
Advertisement
Table of Contents
