Advertisement
8
Sun-3/l60 Hardware Installation Manual
1.6. Unpacking the "Base
Box".
1.
You may place a pad or a cushion down upon a flat surface in an open work-
ing area (to protect the monitor from being scratched while you unpack it).
Give yourself plenty of space to move around.
2.
Place the carton right-side up. Cut the shipping tape with a knife, taking
care not to damage the contents within. Open the four top flaps.
3.
Remove the keyboard box.
4.
Using care, roll the carton first on one side, then upside down, keeping the
flaps open.
5.
Lift the carton up and off of the color monitor.
6.
Remove the side foam pieces and the protective plastic bag.
7.
Remove the foam piece between the monitor and its base.
The monitor is now ready for placement in the work area.
We recommend that you save the shipping carton and packing material for future
use in case the product must be reshipped; any products shipped back to Sun
must be repacked in their original Sun shipping cartons.
The final (and smallest) box know as a "base box" may contain Ethernet cable
(if ordered), software tapes, the mouse kit, (if you ordered a color monitor) and
various optional equipment. Take this equipment out as needed.
Revision A of 10 October 1986
J
Advertisement
