Connecting The Lan Port; Connecting The Wan Port - SonicWALL NSA 2600 Getting Started Manual

Connecting the LAN Port
1 Connect one end of an Ethernet cable to your local
network switch or other networking device, or to your
computer.
2 Connect the other end of the Ethernet cable to the X0
(LAN) port on your SonicWall NSA appliance.
28 SonicWall NSA 2600/3600/4600/5600/6600 Getting Started Guide
Connecting the WAN Port
1 Connect one end of an Ethernet cable to your Internet
connection.
If you have a router, DSL modem, or cable modem,
connect the Ethernet cable to a LAN port on the router
or modem.
2 Connect the other end of the Ethernet cable to the X1
(WAN) port on your SonicWall NSA appliance.
NOTE: If X1 is configured in Wire Mode, configure a
different interface with one of the other WAN types for
use in this step.