Maintain Your Groups (Group Setup); Create A Group (Group Setup); Edit Group Name Details (Edit) - Navman VHF 7000 Owner's Manual

You can display and read your user MMSID at any time, but you get only one
opportunity to enter your user MMSID.
1. Select DSC SETUP, then USER MMSID.
2. If this is the first time that you are entering your user MMSID, a dashed line
appears.
Enter your user MMSID along the dashed line and press ENT when it is
correct.
3. Input the user MMSID again as a check, then select STORE.
If the user MMSID has been entered correctly both times, it is displayed for
3 seconds on the LCD and then saved (SAVED).

4.3 MAINTAIN YOUR GROUPS (GROUP SETUP)

Use GROUP SETUP to create, edit, or delete 1, 2, or 3 groups of frequently
called people stored in alphanumeric order.
A group MMSID always starts with 0.

4.3.1 CREATE A GROUP (GROUP SETUP)

1. Select DSC SETUP, then select GROUP SETUP.
2. If this is the first time that you are entering a group name, a dashed line
appears. Otherwise, any existing group names are displayed. Scroll down
(if required) and enter the group name along the dashed line. It can be
alphanumeric.
3. Enter the group MMSID. (Note that the first number is always 0.)
4. The group name and group MMSID are shown in a confirmation screen.
Select STORE if the entry is correct.

4.3.2 EDIT GROUP NAME DETAILS (EDIT)

1. Select DSC SETUP, then select GROUP SETUP.
24