Chapter 3 - Radio Setup Menu (Radio Setup); Radio Setup Menu (Radio Setup); Customize Or Delete Channel Names (Ch Name) - Navman VHF 7000 Owner's Manual

Chapter 3 - Radio Setup Menu (RADIO SETUP)

3.1 RADIO SETUP MENU (RADIO SETUP)

CH NAME
RING VOLUME
BEEP VOLUME
INTERNAL SPK
WATCH MODE
WX ALERT
COM PORT
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save
and change data.

3.2 CUSTOMIZE OR DELETE CHANNEL NAMES (CH NAME)

The channel charts are listed in Appendix C with their default name tags. CH
NAME gives you the option to edit the channel name tags displayed on your
LCD, as follows:
1. Select RADIO SETUP, then select CH NAME.
2. Use + or - to step through the channels with their name tags until you see
the channel name tag you want to change. In this example, there is no
channel name tag associated with CH01.
3. Select EDIT and press ENT to edit the existing name tag. Input the new name
along the dashed line, then press ENT.
Customize channel names.
See Section 3.2.
Set the volume level of the incoming call notification
beeps. See section 3.3.
Set the volume level of the beeps.
See section 3.3.
Switch on or off any internal speakers that are connected
to the VHF radio. See section 3.4.
Edit the channel name or use the default name.
See section 3.5.
Switch the weather alert beeps on or off. (7100 USA only.)
See section 3.6.
Select NMEA protocol for communications between the
VHF radio and any other instruments. See section 3.7.
19