Local Time Display (Time Offset) - Navman VHF 7000 Owner's Manual

3. Press ENT when all the information is correct.
The vessel latitude and longitude are shown on the LCD, with the UTC time.
The prefix M indicates a manual entry.

2.5.2 LOCAL TIME DISPLAY (TIME OFFSET)

The local time can be set by entering the time offset between UTC and local
time as follows.
1. Select GPS/DATA, then SETTING.
2. Select TIME OFFSET to enter the difference between UTC and local time.
Half hour increments can be used with a maximum offset of +13.5 and a
minimum offset of -13.5.
In this example, a difference of +1.5 hours has been entered and the local
time is displayed with the suffix LOC.
INSERT WORLD PICTURE SHOWING TIME ZONES OFFSET FROM UTC/GMT.
2.5.3 POSITION DISPLAY OPTIONS (LL DISPLAY)
If you have entered the vessel position manually as described in the previous
section, the vessel position is always shown on the LCD with the suffix M.
However, if the time is being updated through a GPS navigation receiver, you
can switch the vessel position display on the LCD on or off as follows:
15