Chapter 4 - Dsc Setup Menu (Dsc Setup); Dsc Setup - Menu Options - Navman VHF 7000 Owner's Manual

Chapter 4 - DSC Setup Menu (DSC SETUP)

These DSC facilities are available only on the VHF7100
USA and VHF7100 EC models, and a valid user MMSID
must be entered to access the DSC functions.

4.1 DSC SETUP - MENU OPTIONS

The following options are available:
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save
and change data.
4.2 ENTER YOUR USER MMSID (USER MMSID)
This is a once-only operation. You must enter your user MMSID before you can
access the DSC functions, as follows:
Enter your user MMSID. If you do not have a user MMSID,
see Appendix E.) See section 4.2.
Enter or change the name and/or details of a group.
See section 4.3.
Choose an automatic or manual response to calls.
See section 4.4.
Enter or change your ATIS MMSID (7100 EC only).
See section 4.5.
Enable/disable the ATIS function (7100 EC only).
See section 4.5.
Turn DSC scanning on/off.
See section 4.6.
Select the type of response to an LL request.
See section 4.7.
23