Package Contents; Firmware; Assembly - Neptune Apex WAV Quick Start Manual

PACKAGE CONTENTS

The WAV 2-pump starter kit comes with these items in the box from Neptune Systems:
1. WAV pumps (2)
2. WAV magnetic mount sets (2)
3. 1LINK AquaBus module
4. 24VDC power supply
5. 6' Aquabus cable
6. Packet of (4) screws for mounting the 1LINK modules (use of mounting screws is optional)
If any of these items are missing, please contact Neptune Systems Support (see last page for contact
information).

FIRMWARE

IMPORTANT: Your Apex Base Unit must be running firmware version 4.40 or higher to
support the WAV. The current firmware version can be checked from the Apex Display on the Self
Test screen. If needed, please upgrade the Apex Base Unit firmware before proceeding with the
installation of the 1LINK and WAV(s). See the
firmware upgrade instructions. Do not connect any WAV pumps to the 1LINK module until the 1LINK module
firmware has been updated.

ASSEMBLY

THE WAV MOUNTS CONTAIN POWERFUL MAGNETS
Be extremely careful not to allow the
magnets to snap togther, as damage to the
mounts and/or personal injury may result.
WAV QuickStart Guide
Firmware Updates page on the Neptune Systems web site
WARNING
Page 1
for