Hyundai HYSG150-2 User Manual page 11

machine to reduce the risk of injury and there is good ventilation from exhaust fumes.
3.100
Only one person at a time should operate the machine.
3.101
Pieces jamming the feed hopper can only be removed safely when the engine has been
stopped and the spark plug HT lead disconnected.
3.102
NEVER leave the machine running whilst unattended.
3.103
Use only original parts for maintaining your stump grinder, otherwise the warranty will be void.
3.104
The stump grinder should ONLY be repaired by a skilled dealer / service-point.
3.105
When in operation the stump grinders noise will exceed 90 dB (A). Therefore all users and
onlookers must wear ear-protection.
3.106
Before use, make sure that the bolts on the blade and fixed blade are tight. After the first one
hour of use check that all nuts, bolts and fixing are still secure.
3.107
Keep the working area clean and free from foreign objects.
3.108
DO NOT operate the stump grinder in the presence of flammable liquids, gas or dust.
3.109
Keep Children, bystanders and pets away whilst operating the stump grinder. Keep the area
free of all distractions.
3.110
Only responsible, properly instructed individuals should operate this machine.
3.111
Inexperienced operators must always be supervised by an experienced operator.
3.112
DO NOT expose the stump grinder to rain or wet conditions.
3.113
Stay alert, watch what you are doing and use common sense when operating the stump
grinder. DO NOT use a stump grinder while you are tired or under the influence of drugs,
alcohol or medications. A moment of inattention while operating this machine may result in
serious personal injury.
3.114
Use proper personal safety equipment. Always wear eye protection. Safety equipment such
as dust mask, nonslip safety boots, hard hat, gloves and hearing protection used for
appropriate conditions will reduce personal injuries.
3.115
Dress appropriately. DO NOT wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can get caught in moving
parts.
3.116
Always wear earplugs or ear muffs to protect your ears.
3.117
Do not start the engine until the machine is in the cutting position next to the stump.
3.118
Do not overreach. Keep a secure footing and balance at all times. This enables better control
of the stump grinder in unexpected situations.
3.119
Check stumps to be removed for embedded nails, wire, metal fence posts and other metallic
objects. Also, check for rocks or other buried impediments which may be thrown dangerously
or cause unexpected machine movements when hit by the cutting wheel.
11