Hyundai HYSG150-2 User Manual page 24

13. ENGINE OIL
Risk of burn from HOT engine and HOT oil – allow engine and engine oil to cool down before
13.1
topping up or replacing oil.
13.2
Drain the used oil while the engine is warm. Warm oil drains quickly.
13.3
Remove the filler cap/dipstick and the drain plug, then place a suitable container under
the oil drain plug and tilt the machine to catch the used oil.
13.4
Wait until all of the oil has drained from the engine. Once all oil is drained check the drain
plug washer and replace if damaged. Replace the drain plug by hand to prevent cross
threading then fully tighten.
13.5
DO NOT dispose of used motor oil in a manner that is incompatible with the
environment. We suggest you take used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it in the domestic waste, pour it on
the ground or down a drain.
13.6
With engine/machine on level ground fill to the upper edge of the oil filler neck with
SAE15W40 oil. DO NOT overfill.
13.7
Screw the filler cap / dipstick in securely.
13.8
Clean up any spilt oil.
24