Power-Up Options - Fluke 789 User Manual

789
Users Manual
Option
Change current span 0 % setting
Disable beeper
Disable auto power-off
Display test/show firmware version
28
info@Fluke-Direct.com
Table 11. Power-Up Options
Pushbutton Default
R
Remembers Toggles between 0 - 20 mA and 4 - 20 mA
last setting range
G
Enabled Disables beeper
J
Enabled Disables the feature that turns off the meter
(Blue)
power after 30 minutes of inactivity. Auto
power off is disabled regardless of this
option if MIN MAX recording is on.
H
Disabled Display HOLD (as long as button is
pushed), then shows firmware version.
Fluke-Direct
Action Taken
.com
1.888.475.5235