Software Version Menu; Alert Screen; Fault Alert; Alarm Alert - Siemens 7SR45 Argus User Manual

2.4

Software Version Menu

Software version menu can be viewed by holding the CANCEL key and followed by pressing of TEST/RESET►
key. The user can view the software information by pressing ▲ or ▼key.
The software version menu contains the following information:
Firmware Art No.
Build Date
Build Time
Serial No
MLFB
Product Art No
Product Name
2.5

Alert Screen

2.5.1 Fault Alert

When any fault is detected by the relay, LCD pops-up the fault alert. Any previous alert pop-up messages are
updated or replaced by the latest message.

2.5.2 Alarm Alert

Alarm alert appears when any binary input is configured for general alarm and it is triggered.

2.5.3 Info Alert

Info alert displays the required information to the user. Info alert displays for 2 s and the alert clears automatically.
Table 1-2 shows the info. alert and the required description.
Table 1-2 Info Alert
© 2017 Siemens Protection Devices Limited
The firmware article number installed in the relay
The date of software version build
The time of software version build
The serial number of the relay
MLFB number of the relay
Unique number of the product assigned by SIEMENS
Product name for display
This alert appears during the edit mode and after 15 s of inactivity time; the
edited value of the parameter will be discarded.
This alert appears when the fault flags are reset and LED test is performed.
This alert appears when the fault flags are reset.
This alert appears when reset of the fault flag is failed due to the presence of
fault current and the fault persists.
This alert appears when the user connects to the USB host.
Enter the password twice for confirmation or changing a password. This alert
message appears when the password does not match with the previously
typed password.
This alert appears when the password entered by the user contains "_" or
any special characters when changing the password.
This alert appears when the user selects to clear the fault or event records
and the operation is successful.
This alert appears when the relay is powered-on in the battery mode.
7SR45 Description of Operation
Chapter 1 Page 14 of 34