Recording; Recording Screen; Record A File - Philips DVT7500 User Manual

4 Recording

Recording screen

1
2
3
4
5
6
7
File name
1
Microphone sensitivity
2
Current folder
3
Recording status
4
Audio progress bar
5
Left volume level meter
6
Right volume meter
7
Recording type
8
Battery status
9
Total number of files in current folder
10
Number of current file
11
Audio time: Passed time and total time of current file
12

Record a file

• Be careful not to cover the microphones while
recording. This might result in a lower recording
quality.
8
• If the recording time of your current recording exceeds
9
the available storage capacity, the recording will stop.
In this case, delete files from your device to make
10
more storage available.
11
• Only recordings in MP3 128 kbps recording format can
be saved on the external memory card.
12
Before you start recording:
12
• Make sure your device has enough battery power left.
When your battery is almost discharged, you will see a
battery low icon:
X The device will turn off and your current recording
will automatically be saved.
• First select the folder you want your recording to be
saved in. You can store 99 files in each of the folders A,
B, C, and D.
If one of the folders is full, your subsequent recordings
will automatically be stored in the next folder.
• We recommend that you make a test recording in order
to find the most suitable presets for your recording and
achieve the best recording results.
Start a new recording
1
In stop mode, press the Index button to select the
desired folder you want your file to be saved in after
recording.
2
Press the Record button.
X The device is in record standby mode.
X The Record/Play indicator flashes red.
• Adjust the microphone gain in record standby mode
by using the microphone gain control. This way, you
can achieve the best recording quality.
3
Press the Record button again to start a new
recording.
X The Record/Play indicator illuminates red.
Pause recording
• In recording mode, press the Record button.
X The Record/Play indicator flashes and the
Recording status icon changes to 'pause'.
Finish recording and save the recorded file
• In recording or pause mode, press the Stop button.
X The recording is saved to the preselected folder.
Note
Tip
Recording 9