Display; Device - Philips DVT7500 User Manual

Quality
You can set the bit rate for each recording according to
your own preferences.
Note
• Only recordings in MP3 128 kbps mode can be saved
on the external memory card.
Timer
Use the timer function to automatically start recording on
a preset date and at a preset time. You can also select
when the recording should stop.
Voice activation
Use voice activation to start recording when you begin
speaking. When you stop speaking, the device will
automatically pause recording after three seconds of
silence. It will resume only when you begin speaking
again. For more information, see
recording.
Auto divide
During recording, the auto divide feature will
automatically split the current recording and save a new
file either every 30 or every 60 minutes.
Note
• If the auto divide feature is turned off, your file will still
be automatically divided after a particular time: MP3
files after 9 hours and 50 minutes, and PCM files after
1 hour.
Limiter
Activate this function to prevent recordings from being
oversteered by sound input over the maximum sound
level. If the recording suddenly exceeds the maximum
sound level, the microphone sensitivity is automatically
reduced.
Low cut filter
This function filters low-frequency sound, e.g.
background noise produced by air conditioners, below
the predefined frequency level.
Voice-activated

Display

Language
Select your desired device language from the language
list. You can change the language whenever you want.
Backlit
To save your Voice Tracer's battery power, you can
reduce the backlight time. If you don't operate your
device for the preset time, the backlight turns off
automatically. If you select the backlight to be on, the
backlight remains on all the time.

Device

Date/time
You can always change the date and time as well as the
time format on your device.
Use the Volume up or Volume down button to select
the time format. Use the Volume up, Volume down, Fast
forward, and Fast rewind button to set the date and
time.
Auto off
Select a time for your device to automatically turn off
when you don't operate it. If you set the time to 0, the
device won't automatically turn off.
Format device
Use this function to format your device's internal storage
and delete all data. For more information, see
data.
Caution
• Formatting your Voice Tracer will delete all data on
your device. Before you perform a data reset, back up
any important data saved on your device.
Note
• Your menu settings won't be deleted and are still
available after resetting the data.
Record light
If you turn on the record light, the Record/Play indicator
will illuminate red when recording.
Device sounds
Select if you want the device sounds to be on or off
whenever you press a button.
Reset
Settings 19