Adjust Microphone Gain; Use The Noise Cut Feature; Add An Index Mark; Multichannel Recording - Philips DVT7500 User Manual

Adjust microphone gain

Adjust the microphone gain during recording in order to
achieve the best recording quality.
1
In recording mode, press the Focus button.
2
Use the microphone gain control to set the
appropriate microphone level.
3
Press the Focus button again to finish the
microphone gain adjustment.
Note
• We recommend that you test the microphone gain
during recording by connecting headphones to
your Voice Tracer. This way you can instantly hear
the changes of the recording sound while you are
adjusting the microphone gain.
Tip
• You can also adjust the microphone gain in record
standby mode. For more information, see
recording.

Use the Noise cut feature

Turn the Noise cut switch on in order to reduce
background noise while recording. This way, especially
voice recordings sound clearer. You can find the Noise
cut switch on the right side of your device. See also
Overview of the audio recorder.

Add an index mark

Use one or more index marks to mark certain points in a
recording as points of reference.
Note
• Up to 10 index marks can be set per recording.
To add an index mark:
• In recording mode or playback mode, press the Index
button at the desired part of your recording.
To go to a particular index mark:
1
In playback mode, press and hold the Index button.
2
Press the Menu button
bookmark.
3
Use the Volume up or Volume down button to scroll
to your desired index mark.
4
Press the Menu button
10 Recording
Start a new
to select the option Go to
to confirm your selection.
To delete an index mark:
1
In playback mode, press and hold the Index button.
2
Use the Volume down button to scroll to the option
Delete bookmark.
3
Press the Menu button
4
Use the Volume up or Volume down button to scroll
to your desired index mark.
5
Press the Menu button

Multichannel recording

You can use multiple recording channels at the same
time, such as XLR, Line-in, and the built-in microphones.
To activate multiple channels for your recording:
1
In stop mode, press and hold the Menu button
2
Press the Fast forward button to scroll to the Record
menu.
3
Press the Volume down button to scroll to Input
source, and then press the Menu button
confirm your selection.
4
Press the Volume down button to scroll to your
desired recording channel, and then press the Menu
button to confirm your selection.
5
To return to the stop mode screen, press the Stop
button.
6
Start recording as described in

Voice-activated recording

Use voice activation to start recording when you begin
speaking. When you stop speaking, the device will
automatically pause recording after three seconds of
silence. It will resume only when you begin speaking
again.
Before you start using voice-activated recording, make
sure that this feature is enabled.
To enable voice-activated recording:
1
In stop mode, press and hold the Menu button
2
Press the Fast forward button to scroll to the Record
menu.
3
Press the Volume down button to scroll to Voice
activation, and then press the Menu button
confirm your selection.
4
Press the Volume down button to scroll to Enable,
and then press the Menu button
selection.
5
To return to the stop mode screen, press the Stop
button.
to confirm your selection.
to confirm your selection.
.
to
Record a file.
.
to
to confirm your