Microphone Recording; Sample Rate Convertor (Monitor Mode) - Philips CDR950BK99 Instructions For Use Manual

Audio cd recorder
Hide thumbs Also See for CDR950BK99:
Table of Contents

Advertisement

RECORDING
Important:
If you want to play the recorded CDR disc on a regular
CD player, it must be finalized. See finalizing discs .
Finalized CDRW discs play only on CDRW compatible
CD players.

Microphone recording

Karaoke recording
1 Connect a (stereo) microphone to the MIC socket.
m lights up. The source active previously will be
selected automatically.
• You can now mix your voice with the sound from the
selected source (DIGITAL I d, DIGITAL I I d, OPTICAL I
p or ANALOG a).
2 Use the REC TYPE key to select the required recording
mode: RECORD DISC, RECORD TRACK, REC
MANUAL or MAKE CD.
3 To start recording press PLAY on the selected source
(RECORD DISC, RECORD TRACK or MAKE CD
selected).
• Press RECORD on the recorder and PLAY on the selected
source (REC MANUAL selected).
• Use the LEVEL (Mic) key to mix your voice with the sound
from the source.
• Use the EASY JOG key to set the recording level.
• For details about recording see the instructions in the
previous sections.
Microphone recording
1 Connect a (stereo) microphone to the MIC socket.
m lights up. The source active previously will be
selected automatically.
2 Press Source repeatedly until MICROPHONE is
displayed.
REM
REC
TIME
TRACK
TOTAL
DIGITAL
I
PROGRAM
OPTICAL
I
CD
RW
ANALOG
3 Use the REC TYPE key to select REC MANUAL.
4 Press RECORD to start recording.
20
REM
TRACK
TIME
FADE
STEP
MANUAL
SYNC
SCAN
SHUFFLE REPEAT
TRACK
ALL
• Use the LEVEL (Mic) key to mix your voice with the sound
from the source.
• Use the EASY JOG key to set the recording level.
• For details about recording see the instructions in the
previous sections.

Sample rate convertor (Monitor mode)

The sample rate convertor is used to convert input signals
into CD-standard digital output signals.
1 Connect the non-digital source to one of the input sockets
of the recorder.
2 Connect the optional recording device to the DIGITAL OUT
or OPTIONAL OUT output socket.
3 Press REC TYPE (without a disc inserted in the recorder).
MONITOR MODE is displayed. The signal will now be
converted into a CD-standard digital output signal (44.1
kHz).
• Use the EASY JOG key to set the recording level.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdr950Cdr950bk

Table of Contents