Samsung ET-YO324 User Manual page 11

Using the controller
3
Mobile device
Tap Gear VR Controller(0000) on the list of available devices to
complete Bluetooth pairing.
The indicator light will flash blue three times.
4
Connect your mobile device to the Gear VR and place the Gear VR on your head.
Control the Gear VR with the controller's keys and touchpad.
• T he PIN for the controller is the four-digit number in parenthesis displayed on the
mobile device's Bluetooth settings screen. The number differs depending on the
controller.
• I f the Bluetooth connection fails or the mobile device cannot locate the controller,
remove the device's information from the mobile device's list. Then, try to connect
again.
Disconnecting or reconnecting devices
If you remove the Gear VR from your head or the current connection ends, the controller
enters sleep mode. Press the controller's trigger, touchpad, or any keys to deactivate sleep
mode and re-enter Bluetooth pairing mode.
The controller will be reconnected to the previous mobile device automatically.
• I f the controller and the mobile device are not kept within the Bluetooth
connection range, the controller will be disconnected.
• I f the batteries are removed from the controller or the Bluetooth feature is
deactivated in the mobile device, the controller will be disconnected.
• I f the Bluetooth connection is lost due to a problem with the connected mobile
device, access the Bluetooth menu on the mobile device to pair the devices again.
• I f your controller is not functioning properly, take it and the Gear VR to a Samsung
Service Centre.
English (UK)
11
9