Listening To The Radio - Aiwa AVJ-X5 Operating Instructions Manual

Listening to the Radio

Preset radio stations in the system's memory
first (see "Presetting Radio Stations" on page
55).
DISPLAY
PRESET
–/+
TUNING
–/+
1
Press FUNCTION repeatedly until FM
or AM appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
Every time you press TUNER BAND, the
band toggles between AM and FM
alternately.
3
Adjust the volume by pressing
VOLUME +/–.
To turn off the radio
Press ?/1.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or – on the
remote repeatedly.
For automatic tuning, press and hold TUNING +
or – on the remote. Press x when you stop the
automatic tuning.
56 GB
?/1
REPEAT/FM
MODE
TUNER BAND
FUNCTION
x
VOLUME
+/–
m
Tips
• If an FM program is noisy, press REPEAT/FM
MODE on the remote so that "MONO" appears in the
front panel display. There will be no stereo effect, but
the reception will improve. Press the button again to
restore the stereo effect.
• To improve reception, reorient the supplied antennas.
To check the frequency or sound
field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front panel
display changes as follows:
index name of station* t frequency t sound
field t volume t index name of station*...
* Only for FM stations which send RDS information
(page 57).