Step 3: Tv And Video Component Hookups - Aiwa AVJ-X5 Operating Instructions Manual

Step 3: TV and Video Component Hookups

Required cords
SCART (EURO AV) cord for connecting a TV (not supplied)
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriate jacks on the
components.
Terminals for connecting video components
Connect the
TV
VCR
Digital satellite receiver
Connecting the system to a TV
Connect the system to your TV using the SCART (EURO AV) cord. Be sure to connect the SCART
(EURO AV) cord to the T EURO AV OUTPUT (TO TV) jack on the system.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB
signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the
operating instructions supplied with the TV to be connected.
Note
When recording on another unit connected to the VIDEO 1 AUDIO OUT jacks, do not change the Sound Field
(page 42), press KARAOKE, adjust the music pitch, or connect/disconnect headphones or a microphone.
18 GB
To the
T EURO AV OUTPUT (TO TV) jack
VIDEO 1 jacks
VIDEO 2 jacks
Yellow (Video)
White (L/audio)
Red (R/audio)