Using The Video Or Other Unit - Aiwa AVJ-X5 Operating Instructions Manual

Controlling the TV
By pressing
TV [/1
TV/VIDEO
You can control your TV by holding the TV
button down and pressing the buttons
below.
Button
1~9, 10/0
.
>
3
#
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use for selecting the channel number greater than
10.
Tip
Depending on the TV manufacture, the following
method works. For double-digit number, press
-/-- first and then number. (For example, for channel
25, press -/--, then 2 and 5.)
54 GB
You can
Turn the TV on or off.
Switch the TV's input source
between the TV and other input
sources.
TV
Selects the TV Channels.
(1-10 CH)
TV CH –*
TV CH +*
VOLUME +
VOLUME –
Using the Video or Other
Unit
You can use VCRs or other units connected to
the VIDEO 1 or VIDEO 2 jacks. Refer to the
operation manual supplied with the unit for
further information on its operation.
Press FUNCTION repeatedly until VIDEO 1
or VIDEO 2 that you connected the unit to
appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
TUNER FM t TUNER AM t VIDEO 1 t
VIDEO 2 t TV* t DVD t TUNER FM...
* When selecting the TV, TV sound is output.
FUNCTION