Table of Contents
Advertisement
192
ONLINE TESTS (CONTINUED)
1.
To obtain the matrix 'printer verification (online
exerciser) menu:
a. Enter the identification number of the printer (a
letter and a number).
b. Press the Enter key.
2.
To select the number of times to run the test:
a. Enter, from the menu, the number that
corresponds to the desired number of times to
run the test.
b. Press the Enter key.
The display will show when the test is executing,
when it is complete, and when a hard error occurs.
3.
To repeat the test, press the Enter key.
192
Wiring Diagram,
Diagnostic Aids
To select Configuration Data:
1.
Press the 3 key.
2.
Press the Enter key.
The descriptions for configuration data are:
1.
Device Addr is the address of the controller.
2.
Unit Addr is the address of station(s) assigned to
the controller. The first digit is the port number
and the second digit is the station address.
3.
Logical I D is the name the system uses to address
this station.
4.
To return to the prime option menu:
a. Press the C key.
b. Press the Enter key.
1.
To select the Error Recording Analysis Procedure
(ERAP) men.u:
a. Press the 4 key.
b. Press the Enter key.
2.
To select the serial matrix printer:
a. Press the 9 key.
b. Press the Field Exit key.
Maintenance
5256 MIM
1-83
Advertisement
Table of Contents
