Setting The Time And Date; Advanced Options - Sigma 980 Operating And Maintenance Manual

Appendix C

Setting the Time and Date

Advanced Options

Page 120
Programming Features
The Options menu can set the:
• Time and Date for the real time clock in the 980 Flow Meter.
• Program the advanced features of the flow meter.
• Select level sensor when multiple sensors are installed.
From the Main Menu, select
11:00 AM 21 - APR - 01
ACCEPT
CLEAR
ENTRY
USE +/- KEY TO CHANGE 12/24 HR FORMAT
Starting with the hours and minutes, use the numeric keypad to enter
numbers in the flashing cursor. Use the
and 24-hour formats. Use the soft keys on the right of the display to toggle the
AM/PM and month fields to the desired selection. Press the
key to clear all numeric fields. When complete, press the
save the changes.
1. From the Main Menu, select
11:00 AM 21 - APR - 01
4–20 mA OUTPUTS
ALARMS
SELECT
CALIBRATION
COMMUNICATIONS SETUP
DATALOG
DIAGNOSTICS
RETURN
FLOW TOTALIZER
2. Use the up and down arrow soft keys to highlight the choice, then press
the soft key to pick that item.
SELECT
3. Proceed through the series of screens to configure the parameters for the
selected item.
OPTIONS > TIME/DATE.
_ _: _ _ AM _ _ -APR- _ _
MODE: 12-HR FORMAT
keys to toggle between 12-hour
+/-
OPTIONS > ADVANCED OPTIONS.
ADVANCED OPTIONS
TIME / DATE
CHANGE
AM / PM
CHANGE
MONTH
CLEAR ENTRY
soft key to
ACCEPT