Appendix C Programming Features; Review All Items; Displaying Data; Selecting The Channel - Sigma 980 Operating And Maintenance Manual

Appendix C

Review All Items

Displaying Data

Selecting the Channel

Note: Only the channels for
which logging has been enabled
will be listed.
Programming Features
To view programmed entries without accidently changing any of the
information, select the Review All Items from the SETUP menu. This
information fills more than one screen, scroll through the setup information
one page at a time with the arrow keys. Press the MAIN MENU key to exit.
11:00 AM 21 - APR - 01
REVISION:
FLUME TYPE: PALMER BOWLUS FLUME
FLUME SIZE:
SAMPLER PACING:
FLOW UNITS:
LEVEL:
.
11:00 AM 21 - APR - 01
CHANNEL 3 ppm
CHANNEL 4 ppm
CHANNEL 5 ppm
CHANNEL 6 ppm
CHANNEL 7 ppm
MEMORY MODE
The Display Data function provides the recorded data for any channel being
logged in a tabular report or a graph.
In addition, for tabular reports, the data can be viewed from the beginning,
from the end, or from a specific point in time. A graph can display any 24-hour
period, zoom in to any portion of the 24-hour period for finer detail, or center
the graph on a specific point in time.
1. Press from the Main Menu to display a list of logged
DISPLAY DATA
channels.
2. Highlight the desired channel using the up and down arrow soft keys then
press the soft key.
SELECT
11:00 AM 21 - APR - 01
SELECT
FLOW
RAINFALL
PH
RETURN
1.00
12 in.
mgd
gal
in.
NOT LOGGED 1 min
NOT LOGGED 1 min
NOT LOGGED 1 min
NOT LOGGED 1 min
NOT LOGGED 1 min
WRAP
STATUS SCREEN
STATUS SCREEN
DISPLAY DATA
Page 117
Programming Features