Wireless Network - Brother ADS-2600W Quick Setup Manual

Wireless Network

Install the drivers & software
®
(Windows XP Home/XP Professional/Windows Vista
11
Before you install
Make sure that your computer and machine are on
and you are logged on with Administrator rights.
12
Install MFL-Pro Suite
a
Put the supplied DVD-ROM into your
DVD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
b
The DVD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
c
Choose Wireless Network Connection, and
then click Next.
d
When Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are using a firewall other than the
®
Windows Firewall, see the instructions
provided with your firewall software for
information on how to add the following
network ports.
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP port 137 and 161.
e
Choose your machine from the list, and then
click Next.
Note
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 9-b on page 12 and setup
the wireless connection again.
• If you are using WEP and the LCD displayed
Connected but your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case sensitive.
® ®
/Windows 7)
f
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
g
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
13
Finish and restart
a
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
b
The following screens will appear.
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research &
Support Program starts up, follow the
on-screen instructions.
Note
Internet access is required for the software
update and the Brother Product Research &
Support Program.
The installation is now
Finish
complete.
Now go to
Proceed to Install Optional Applications on
page 19.
®
Windows
17