Communication Testing - Decagon Devices EM50 Operator's Manual

5 EM50G CELLULAR COMMUNICATION Em50 Series
Click "OK" after making configuration changes. Click Apply to save
communication settings in your Em50G. Your current settings show
up in the communications option field.
Note: Sensor data recorded by the Em50G while it is configured not
to upload data to the Data Service is stored in the logger, but does not
upload to the Data Service. Turning the upload feature on initiates
uploading data collected on the next measurement interval.
5.5

Communication Testing

ECH20 Utility helps you check the quality of the cellular communi-
cation of your Em50G using the Communication Test feature. Open
the Em50G Communication Test dialog by clicking the Test button
or choosing "Communications Test..." in the Actions menu.
38