Actions Menu - Decagon Devices EM50 Operator's Manual

Em50 Series 4 SOFTWARE & CONFIGURATION
4.3.4

Actions Menu

Connect/Disconnect performs the same function as the connect/di
sconnect button in the toolbar. It initiates a data communication
connection between your Em50 and your computer. You must first
connect to your Em50 before downloading data.
Other Actions Menu Functions
The Get Settings command retrieves all the port and configuration
settings from your Em50. These settings are automatically collected
when you connect to your Em50. You can use this option to check
to make sure your changes are stored in the Em50.
The Apply Settings feature applies the parameters you changed
to your Em50. This operates just like the Apply button on the
main screen. This option is only available when there are parameter
changes available to send to the Em50.
The Scan Logger Ports option allows you to take readings from
each port independent of the others. See the section "Instantaneous
Measurements" in Section 4 for details and procedures.
Use the Digital Sensor Terminal for SDI-12 addressing and query
of our digital SDI-12 sensors. See the respective manuals for these
sensors for additional information on SDI-12 capabilities.
The Set the Date/Time command instructs the ECH20 Utility
to set the Em50 time and date according to the time and date on
your computer.
Use Communication Test when you connect to the Em50R or
Em50G loggers using ECH20 Utility to see how well the logger wire-
less communication is working. If the test suggests that you have
a poor connection, you can move to a new location and re-try the
communication tests.
Use List Cellular Carriers for troubleshooting to see which cel-
31