Table of Contents
Advertisement
Connections
Connecting your Macintosh
®
computer to your LCD display will enable you to display your computer's screen image. Some video cards or
drivers may not display images correctly.
•
To connect the RGB2 (D-SUB) connector (mini D-sub 15 pin) on the LCD display, use a shielded RGB signal cable which has ferrite cores
on each end of the cable as it is illustrated below (mini D-sub 15 pin to mini D-sub 15 pin) (not supplied.)
For older Macintosh
®
computers, use Macintosh cable adapter to connect to your Macintosh's video port.
•
To connect the RGB3 DVD/HD IN connector (BNC) on the LCD display, use a signal cable (mini D-sub 15 pin to BNC x 5)(not supplied.)
•
If you use with a Macintosh PowerBook, set "Mirroring" to off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special
identification or configuring your display's image and display may require.
•
The AUDIO1, 2 and 3 can be used for audio input. For connection, select AUDIO1, 2 or 3 from the AUDIO INPUT button.
LCD display
LCD display (second display)
–continued
Connecting to a Macintosh
English-12
®
Computer
Advertisement
Table of Contents
