Preparations; Connecting The Vf Cable - JVC VF-HP900 Instructions Manual

Connecting the VF Cable

To connect a VF cable, do so after turning off the
power switch on the camera unit.
Connect the [VF CABLE] terminal of the viewfinder
to the [VF] terminal of the camera using the
supplied VF cable.
1 Unfasten the 4 screws to remove the rear
cover
.
2 Unfasten the 2 screws to remove the cable
clamp
.
12

Preparations

Rear Cover
Screws
Cable Clamp
[VF CABLE] Terminal
Screws
3 Plug the supplied VF cable firmly into the
[VF CABLE] terminal
VF Cable
.
Memo :
Pay attention to the orientation of the VF cable
0
connector when plugging in.
4 Fit the VF cable into the groove of the cable
holder and attach the cable clamp with the
2 screws
.
5 Be sure to mount the rear cover with the 4
screws
[VF CABLE] Terminal
Cable Holder