VTL S-400 II series Owner's Manual page 35

>POWER
{ON|OFF}
>MUTE {ON|OFF} For Muting and Unmuting the
>MODE [TRI|TET]
>TOTLTIME
>TUBETIME
[CLEAR]
>ACINPUT
[READ|SET]
>READTEMP
{F|C}
>PHASE
>BIASLEDS
{ON|OFF}
>COUNTDN
{ON|OFF}
>TUBEFLT
[CLEAR]
>VTL
>VERSION
>VIEWERR
S-400 Amplifier Owner's Manual
VTL
For powering the amplifier ON and
OFF
amplifier
For querying the mode, and
selecting Triode or Tetrode modes
For displaying the total time the
amplifier has been powered up,
excluding standby time
For displaying powered up time
since last reset, excluding standby
time, and for clearing TUBETIME
For displaying the AC Voltage
input, and the internal AC Voltage
setting of the amplifier
For displaying the unit temperature
in degrees Fahrenheit or Celsius
For querying the phase setting of
the amplifier
For unsuppressing and suppressing
the normal bias LED activity
For muting the power up
countdown
For querying tube fault status, and
to clear a tube fault
Returns factory contact info
Returns the version number of the
main display software.
Displays the last 16 stored error
messages, starting with the most
31
>PHASE ZERO
>PHASE 180
Contact VTL:
Email: mail@vtl.com
Tel. 909-627-5944
Fax. 909-627-6988
You can send the
>VIEWERR command