Panic From Your Phone; Keypad Activations - Honeywell Apex Destiny 4100 User Manual

The DESTINY allows 8 different disarm codes. Check with your
installer to find out how many codes are enabled. To enter or
change an auxiliary code;
1. Enter your primary disarm code.
2. Follow steps 2 through 4 above, however, in step 3
instead of entering 01 you will enter the two digit
number of the code you wish to initiate or change.
One or more of your auxiliary codes can be a “disappearing”
code which is useful for domestic workers, repairmen or
anyone whose access to your home you want to limit. Your
installer can program the number of times a “disappearing”
code will remain active each time it is assigned.
One or more of your auxiliary codes can be used as a “duress”
code. Your installer can program your system so that the use of
a duress code will give the appearance of being a normal
disarming code. However, even though no alarm is sounded at
the location of the security system, there will be a silent alarm
signal sent to the central station. For the duress code to function
as designated, no normal codes can be the same as any duress
code.
P A NI C FR O M Y O UR PH O NE
Anytime you have accessed your system from an on-site
phone, pressing the 0 key five times in a row will initiate a
PANIC alarm.
NOTE: Never program a disarm code with all zeroes.
KEYP A D A C TIV A TI O NS
Simultaneously pressing certain keys on the keypad will
result in the following:
3 and STATUS - FIRE Alarm
6 and M O NITOR - EMERGENCY Alarm
9 and F1 - PANIC Alarm
M O NITOR -Door & Window annunciator ON
with beep, ON with speech or OFF
P A NI C FR O M
Y O UR PH O NE
KEYP A D
A C TIV ATI O NS
POWER HOME
STATUS AWAY
1 3
2
STATUS
4 5 6
MONITOR
F1
7 8 9
A 0 H F2
13