Hardware Installation - 4IPNET HSG326 Quick Installation Manual

Hardware Installation

Please follow the steps mentioned below to install the hardware of HSG326:
1. Place the HSG326 at a best location.
The best location for HSG326 is usually at the center of your wireless network. The HSG326
can be mounted on any wall outlets or on any flat surface;
Secure the mounting plate on the mounting surface by tightening the screws (included) at the
highlighted area below:
a) Standard US Outlet box
Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a
switch, a router, or a hub; or use the 110 punch-down block as your uplink connection.
Copyright © 4IPNET, INC. All rights reserved.
Universal Mounting Panel
4
Quick Installation Guide
HSG326 Wireless Hotspot Gateway ENGLISH
b) Standard EU Outlet box