ONNLINE ESSENSSE Instruction Manual page 20

4. INSTALLATION
4.2 CONTROL PANEL
5. EXTERNAL ACCESSORIES
5.1 CONNECTING EXTERNAL ACCESSORIES
DO NOT MISS!
When connecting external accessories, the air curtain must be disconnected from mains el. power.
•
All external control components must be connected according to the electrical diagram.
•
Connectors must connected to the electrical board with appropriate force and always perpendicular to the base.
•
5.1-1 DS Door switch
TECHNICAL INFORMATION
- Suitable for all SM regulations
- Insulated switching contact with a max. voltage of 230V, 6A
- IP67, can be connected as a switching or break contact
Connectors on SM control modules: DS / DS
ATTENTION!
Not supplied with the product.
5.1-2 Thermostatic valve – TV1/1
TECHNICAL INFORMATION
- Thermostatic valve for regulation of the water heat exchanger
- Suitable for all curtain models with a water heat exchanger
-Works independently of the control electronics
ATTENTION!
Not supplied with the product.
20