8. MAINTENANCE AND CLEANING
ATTENTION!
Before carrying out any work inside the air curtain, the main power input must be disconnected. The air curtain must be
allowed to cool down!
It is forbidden to use compressed air, aggressive chemicals, solvents or water for cleaning.
•
Clean using a damp cloth, fine brush or vacuum cleaner.
•
Clean the surface of the air curtain including the suction inlet part.
•
Clean as necessary, it is recommended that cleaning should be performed at least once every 3 months.
•
Adhere to workplace safety and use protective aids.
•
9. CONCLUSION
9. CONCLUSION
After installing the air curtain, carefully read the Manual for the respective regulation module. If anything is unclear or you have
questions, do not hesitate to contact our sales or technical support department.
CONTACT
Adress:
Onninen Oy
Mittalinja 1
01260 Vantaa
Finland
Internet:
www.onninen.fi
14