Using A Flash Media Card; Installing A Flash Media Card - Lenovo ThinkPad 11e 3rd Gen User Manual

automatically and the camera-in-use indicator turns on in green. For more information about using the
camera with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
• For Windows 7: Start the Communications Utility program. Click the Manage Settings button and
configure the camera settings as desired.
• For Windows 10: Do one of the following:
– Open the Camera app and click the settings icon in the upper-right corner. Follow the instructions on
the screen to configure the camera settings as desired.
– Click Lenovo Settings from the Start menu. Then click Camera. Follow the instructions on the
screen to configure the camera settings as desired.

Using a flash media card

Your computer has a media-card slot, and it supports the following types of cards:
• MultiMediaCard (MMC) module
• Secure Digital (SD) card
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the CPRM feature for the SD card.
Attention: While transferring data to or from a flash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.

Installing a flash media card

Attention: Before you start installing a card, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. Static electricity could damage the card.
To install a flash media card, do the following:
1. Locate the media-card slot on your computer. See "Left-side view" on page 5.
2. Ensure that the metal contacts of the card are facing down and pointing toward the media-card slot.
3. Press the card firmly into the media-card slot.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable
the feature:
1. Go to Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
38
ThinkPad 11e 3rd Gen and ThinkPad Yoga 11e 3rd Gen User Guide