Station Preset Buttons; Waveband Button; Autostore Control; Traffic Information Control - Ford FUSION 2011 Owner's Manual

STATION PRESET BUTTONS

This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. The audio unit will mute.
When sound returns the station has
been stored.
This can be repeated on each waveband
and for each preset button.
Note: When you drive to another part of the
country, FM RDS (radio data system)
stations that broadcast on alternative
frequencies are stored on the preset
buttons.

WAVEBAND BUTTON

Note: The AM/FM or RADIO button can also
be used to return to radio reception when
you have been listening to another source.
6000CD and 6006CDC
Press the AM/FM button to select from
the wavebands available.
Sony CD
Press the RADIO button to select from the
wavebands available.

AUTOSTORE CONTROL

Note: This function will overwrite the
previously stored autostore preset stations.
Note: This function can also be used to
store stations manually in the same way as
other wavebands.
Audio unit operation
Note: The strongest signals available on
the selected waveband will be stored.
The sound is muted and AUTOSTORE will
be shown in the display while the unit
searches through the frequencies.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
6000CD and 6006CDC
Press and hold the AM/FM button.
Sony CD
Press and hold the AST or RADIO button.
TRAFFIC INFORMATION
CONTROL
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic programme information.
Activating traffic announcements
Before you can receive traffic
announcements, you must press the TA
button. Either TA-D or TA-L will be shown
in the display to indicate that the feature
is switched on.
If you are already tuned to a station that
broadcasts traffic information, TP will also
be shown in the display. Otherwise the unit
will search for a traffic programme and
display TP SEEK while doing so. If it cannot
locate such a station, NOT FOUND will be
shown in the display.
TP will be shown within a box in the display
when you are tuned to a station providing
traffic information from a linked RDS (radio
data system) or EON (enhanced other
network) station.
141