Table of Contents
Advertisement
Note: Refer to your audio guide for details
of the controls.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button CD, AM/FM or
AUX.
Making a call
Dialling a number
You can access your phone address book
either with the phone docked in the cradle
or via Bluetooth. The entries will appear in
the audio unit display.
1.
Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Keep pressing the MENU button until
PHONEBOOK appears.
4. Press the seek buttons to select the
desired phone number.
Note: Press and hold the seek button to
skip to the next letter in the alphabet.
5. Press the PHONE or the call accept
button to dial the selected phone
number.
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #), you can
also direct dial by entering the number on
the radio display via the keypad and
pressing the call accept button:
1.
Press the call accept button.
2. Dial the number using the telephone
keypad on the audio unit.
3. Press the call accept button.
Note: If you enter an incorrect digit whilst
entering a phone number, press the seek
down button to erase the last digit. A long
press will erase the complete string of digits.
Telephone
Press and hold 0 to enter a + digit.
Ending a call
Calls can be ended by either:
pressing one of the following buttons
on the audio unit: PHONE, CD,
AM/FM or ON/OFF
pressing the MODE button on the
remote control
pressing the call reject button.
Note: If you have an audio unit with a
telephone keypad you can end a call only
with the call reject button.
Redialling a number
1.
Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Select the CALL OUT list or the CALL
IN list.
Note: If the active phone does not provide
a call out list, the last outgoing call
number/entry is displayed.
4. Press the seek button on the audio unit.
5. Press the PHONE or the call accept
button to dial the desired phone
number.
Redialling the last dialled number
Note: This applies to only audio units with
a telephone keypad
1.
Press the call accept button.
2. Press the call accept button again to
display the last dialled number.
3. Press the call accept button a third
time to dial the number.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by either:
159
Advertisement
Table of Contents
